The effect of catalyst particle size on dehydration of methanol to dimethyl ether is investigated using fixed bed and micro-channel reactors at different temperatures and weight hourly space velocities. The experiments were carried out at 290 and 320oC. The space velocities were changed from 10 up to 90h-1 and from 1.22 to 3.65h-1 for fixed bed and micro-channel reactors, respectively. Consider...

A microfluidic reactor for synthesizing cadmium selenide (CdSe) quantum dots (QDs) was synthesized out of a silicon wafer and Pyrex glass. Microfabrication techniques were used to etch channels into the silicon wafer. Holes were wet-drilled into the Pyrex glass using a diamond-tip drill bit. The Pyrex wafer was anodically bonded to the etched silicon wafer to enclose the microfluidic reactor. C...

A modified method has been developed for the α determination in the 1/E1+α epithermal neutron spectrum of reactor. It is based on the Cd-covered and without Cd-covered irradiations of two monitors. This method was applied to determine the α value in the channels of Dalat reactor and the results were compared with those obtained by the other methods. It appeared that the results of the modified ...

The neutron temperature is a characteristic parameter in irradiation channels of reactor. For nuclides which have resonances in the thermal neutron energy range, their Westcott g-factors are different from unity. The values of g-factors and cross-sections of (n, γ) reaction of these nuclides are temperature dependence. The standard energy for tabulation of thermal neutron cross-section (σ0) is ...

Tarapur Atomic Power Station is a twin unit Boiling Water Reactors. The rated initial capacity of each unit was for 210 MWe. Subsequently due to Secondary Steam Generator tube leak problem, the units were de-rated to 160 MWe in the year 198485. The station has completed 36 years of successful commercial operation. TAPS reactor fuel channels are made of Zircaloy -4, material. These are used alon...

This work focuses on the development and improvement of numerical tools for the simulation of catalytic monolith reactors. These simulations cover detailed descriptions of reaction mechanisms, transport in gas-phase and washcoats, fluid flow in single channels, and the entire reactor. In DETCHEM, the concept of building a transient model of the monolith reactor by the calculation of steady-stat...

A novel dynamic covalent gel strategy is reported to immobilize an asymmetric catalyst within the channels of a microfluidic flow reactor. A layer of a catalytically active Mn–salen dynamic covalent imine gel matrix was coated onto a functionalized capillary. Mn–salen active moiety was incorporated into dynamic covalent imine gel matrix via the reaction of a chiral Mn–salen dialdehyde unit with...